Description

VersaMAXX Extendable 53 Feet to 58 Feet Model Standard Equipment

Net Capacity: 50 tons concentrated in 16 feet

Nominal: OAL 53 feet Closed to 58 feet Open. 8 feet 6 inches Wide

GOOSENECK: Hydraulic Detachable Gooseneck 5 Position Adjustable Neck 50″ Loaded 5th Wheel Height, 15″ Setting, 2″ King pin
Narrow neck, Chain storage rack under gooseneck
2″ King Pin 84″ Swing Radius
PTO powered: two main & one lift arm cylinders
Hydraulic Controls in a separate covered box
Front lugs provisioned for flip neck
Hydraulic connection on both sides of neck for winching operation

DECK: Nominal Deck Length: 22.5 feet Closed to 27.5 feet Open Loaded Deck Height: 22 in 6 in Loaded Ground Clearance
4 Beam design – 100,000 psi yield flanges & 80,000 web minimum All 4 Beams same height & Beams are tapered like Paver Models I-Beam Cross members on (approx.) 24″ Centers
Junior I-Beam Cross members alternating – Outside bay only
1.5″ Nominal Apitong Decking – Full Width, Secured by Floor Screws D Rings: 14 Pairs(6 Deck, 1 Bolster, 1 Rear CM, 3 Porch, 1 Trans.) Tie Downs & Chain Slots : Top Flange Outer beams 24” centers Outriggers: 10 Pair Swing out + 1 Pair Heavy duty hook on at front Front Flip Ramps (removable) for loading
Two 6 ft AL. Bus Ramps (Front/Rear Lugs included), Stored on neck

REAR SECTION: Rear Deck 19 ft 7 in,Open Boom trough, brackets for Oversize Load Sign Axles: Three 5″ round, 5/8″ wall 25000# nominal capacity Suspension: Ridewell or Equivalent air ride with Oil Seals
60″ axle spacing, Open wheel wells, axle chains with cut off valves Rear axle equipped with air lift, Auto Slack Adjusters
12-1/4″ x 7-1/2″ Air, Parking Brakes 1st & 2nd Axles, ABS: 2S1M
Hub: 8 Stud, Hub Piloted, Long studs, Cast Drums
235/75R17.5, 16PR (Low Profile) radial tires, Aluminum Outer & Steel Inner Wheels, Tire inflation system, 5 position ride height control with dump valve & Air Gauge Air Ride Suspension With 5 Position Ride Height
10 Apitong riser boards installed on bolsters & porch 

GENERAL: 12V System with 7 way, Modular Harness, LED Sealed Beam Lights Strobe light package with toggle switch on rear
Epoxy Primer & Black Polyurethane Paint
Flag and Flag Holders – 2 Pairs – front deck and rear of trailer
Mid-Turn Signal/Clearance Light
Tool Tray: 4′ expanded metal at front of deck (approx.)
Red & White Conspicuity tape and KS Mud Flaps
Winch: Two 20,000 lb. planetary hydraulic on neck & rear deck 100’ of 5/8” wire rope & shackle, fairing rollers & cable tensioner Four function wireless remote (controls both winches)
LED-Work lights on both winches with covered toggle switch Battery Back-up w/ charger on rear for disconnected neck operation