Net Capacity: 50 tons concentrated in 16 feet

Nominal: OAL 48 feet Closed to 53 feet Open 8 feet 6 inches Wide

Gooseneck: Hydraulic  Detachable Gooseneck 5 Position Adjustable Neck, 50″ Loaded 5th Wheel Height, 15″ Setting, 2″ King pin Narrow neck, Chain storage rack under gooseneck 2″ King Pin 84″ Swing Radius, PTO powered: two main & one lift arm cylinders, Hydraulic Controls in a separate covered box, Front lugs provisioned for flip neck, Hydraulic connection on both sides of neck for winching operation.

Rear Section: Rear Deck 19 ft 7 in, Open Boom trough, brackets for Oversize Load Sign, Axles: Three 5″ round, 5/8″ wall 25000# nominal capacity, Suspension: Ridewell or Equivalent air ride with Oil Seals, 60″ axle spacing, Open wheel wells, axle chains with cut off valves, Rear axle equipped with air lift, Auto Slack Adjusters, 12-1/4″ x 7-1/2″ Air, Parking Brakes 1st & 2nd Axles, ABS: 2S1M, Hub: 8 Stud, Hub Piloted, Long studs, Cast Drums, 235/75R17.5, 16PR (Low Profile) radial tires, Aluminum Outer & Steel Inner Wheels, Tire inflation system, Automatic/ Manual ride height control with dump valve & Air Gauge, Air Ride Suspension With 5 Position Ride Height.

Deck: Nominal Deck Length:  17.5 feet Closed to 22.5 feet Open, Loaded Deck Height: 22 in 6 in Loaded Ground Clearance, 4 Beam design – 100,000 psi yield flanges & 80,000 web minimum, All 4 Beams same height & Beams are tapered like Paver Models, I-Beam Cross members on (approx.) 24″ Centers Mid-Turn Signal/Clearance Light, Junior I-Beam Cross members alternating – Outside bay only, 1.5″ Nominal Apitong Decking – Full Width, Secured by Floor Screws, D Rings: 9 Pairs – 6 Pair on the outside, 1 pair on each Bolster, Tie Downs & Chain Slots : Top Flange Outer beams 24” centers, Outriggers: 13 Pair Swing out + 1 Pair Heavy duty hook on at front, Front Flip Ramps (removable) for loading & AL. Bogie Ramp: Manual raise / Four function wireless remote (controls both winches), Two 6′ AL. Bus Ramps (Front/Rear Lugs included), Stored on neck .

General: 12V System with 7 way, Modular Harness, LED Sealed Beam Lights, Strobe light package with toggle switch on rear, Epoxy Primer & Black Polyurethane Paint, Flag Holders – 2 Pairs –  front deck and rear of trailer, Tool Tray: 4′ expanded metal at front of deck (approx.), Red & White Conspicuity tape, KS Mud Flaps, Winch: Two 20,000 lb. planetary hydraulic on neck & rear deck, 100’ of 5/8” wire rope & shackle, fairing rollers & cable tensioner, LED-Work lights on both winches with covered toggle switch Battery Back-up w/ charger on rear  for disconnected neck operation.